PSC Detention Prevention: A 2026 Analysis of Common Deficiency Codes in Indonesian Ports and How Owners Can Pre-Audit

Preventing unexpected port state control detentions in Indonesian ports requires shipowners and superintendents to analyze 2026 Tokyo MOU deficiency codes well before entering regional waters. Conducting targeted pre-arrival self-audits across fire safety systems, life-saving appliances, and MARPOL record books ensures continuous ship compliance and eliminates common technical triggers. Partnering with an experienced local ship agency provides vessels with updated port inspection insights and rapid shore-side support to close minor observations early.

PSC Detention Risk in Indonesian Ports

Indonesia participates in the Tokyo Memorandum of Understanding (Tokyo MoU), the regional Port State Control framework covering the Asia-Pacific region. PSC inspections assess whether foreign vessels comply with applicable international maritime requirements, including SOLAS, MARPOL, STCW, and the Maritime Labour Convention (MLC).

Not every deficiency leads to detention. However, serious deficiencies affecting vessel safety, crew welfare, or environmental protection may result in the vessel being prevented from sailing until the responsible authority is satisfied that the necessary corrective action has been taken. For shipowners, PSC detention prevention requires attention to equipment condition, maintenance records, and crew operational readiness before entering port.

While Indonesia operates under the unified Tokyo MoU framework, local inspection priorities, boarding frequency, and detention enforcement can vary significantly depending on the specific port of call—particularly along high-traffic transit corridors such as the Singapore Strait. Understanding how Indonesian PSC officers approach vessel targeting in major maritime gateways compared to neighboring regional hubs helps fleet managers tailor their pre-arrival readiness. For a closer look at regional inspection trends and port-level enforcement benchmarks, explore our Port State Control in Batam comparative guide for 2026.

What Does the 2025 Tokyo MoU Report Reveal?

According to the Tokyo MoU Annual Report 2025, published in May 2026, a total of 35,546 PSC inspections were conducted across participating authorities. Of these inspections, 1,255 resulted in detention, representing a regional detention rate of 3.53%.

The report also recorded 90,168 deficiencies, with fire safety, lifesaving appliances, working and living conditions, and safety of navigation among the most frequently identified categories. These findings provide a useful reference for vessels preparing to call at Indonesian ports. However, the figures represent the entire Tokyo MoU region rather than an Indonesia-specific deficiency ranking.

Most Common Detainable Deficiency Codes in 2025

The following table identifies the ten most frequently recorded detainable deficiencies from the Tokyo MoU Annual Report 2025, with their corresponding PSC deficiency codes.

Deficiency CodeDeficiency DescriptionFindings
07109Fixed fire extinguishing installation215
15150ISM200
11101Lifeboats152
03108Ventilators, air pipes, casings138
07113Fire pumps and pipes118
07106Fire detection and alarm system114
07114Remote means of control in machinery spaces109
07115Fire dampers106
15109Maintenance of the ship and equipment104
14104Oil filtering equipment92

Source: Tokyo MoU Annual Report 2025, Table 15, and Tokyo MoU Deficiency Code List.

These figures represent detainable deficiency findings, not the number of vessels detained for each individual code. Several fire safety deficiencies appear among the leading findings, followed by ISM implementation, lifesaving equipment, and maintenance-related issues. The results indicate that detention risk is associated with both technical equipment failures and weaknesses in onboard safety management.

Which Deficiencies Should Shipowners Prioritize?

Prioritizing detainable safety items during port state control inspections requires shipowners to focus first on Life-Saving Appliances (LSA) and Fire-Fighting Equipment (FFE), which remain the leading triggers for immediate vessel detentions. Conducting regular operational drills and verifying emergency fire pumps, lifeboat davits, and fire dampers ensures uninterrupted ship compliance under 2026 SOLAS mandates. Resolving high-risk safety defects before arrival protects fleet schedules and helps operators reduce cost exposure from severe detention penalties.

Fire Safety Equipment and Systems
Fire safety accounts for several of the most frequently recorded detainable deficiencies.
These include fixed fire extinguishing installations, fire pumps, fire detection systems, remote controls, and fire dampers. Before arrival, the vessel should verify that required firefighting arrangements are properly maintained and operational.
Particular attention should be given to equipment that may not be used during routine operations but must function during emergencies. Inspection preparation should include reviewing service records, identifying outstanding defects, and confirming crew familiarity with the relevant emergency procedures.

Lifeboats and Life-Saving Appliances
Lifeboats recorded 152 detainable findings in 2025. Common inspection concerns may involve equipment condition, maintenance, launching arrangements, or operational readiness. A pre-arrival review should include checking lifeboat engines, onboard equipment, relevant servicing records, and associated launching arrangements. Crew members should also understand their assigned emergency duties. Any testing involving launching systems must follow applicable safety procedures and manufacturer requirements.

ISM and Vessel Maintenance
ISM-related deficiencies accounted for 200 detainable findings, while maintenance of the ship and equipment recorded another 104. These findings highlight the importance of effective Safety Management System implementation. An unresolved equipment defect may raise additional concerns when maintenance records are incomplete or corrective actions have not been properly managed. Shipowners should review outstanding defects, overdue maintenance, internal audit findings, and corrective action reports. The records should accurately reflect the vessel’s actual condition rather than simply demonstrate that maintenance procedures exist.

Water and Weathertight Integrity
Ventilators, air pipes, and casings accounted for 138 detainable findings. Defective closing arrangements, corrosion, damaged seals, and deteriorated structural components may compromise the vessel’s protection against water ingress. Before arrival, responsible crew members should inspect accessible closing devices, securing arrangements, and surrounding structures. Identified defects should be evaluated and corrected according to the vessel’s applicable maintenance and safety requirements.

Pollution Prevention Equipment
Oil filtering equipment recorded 92 detainable findings. For vessels subject to the relevant MARPOL Annex I requirements, equipment such as oily water separators and associated monitoring arrangements must remain compliant and operational. Pre-arrival checks should include equipment condition, alarm functionality, relevant piping arrangements, and maintenance records. The crew should also understand the approved operating procedures and applicable discharge restrictions.

How Can Shipowners Conduct a Pre-Arrival PSC Self-Audit?

A pre-arrival self-audit allows shipowners to identify potential deficiencies before an official inspection. The review should focus on safety-critical equipment, documentation, and outstanding maintenance issues, while considering the vessel’s type, age, and inspection history.

Pre-Arrival PSC Self-Audit Checklist

Inspection AreaRecommended Pre-Arrival Check
Fire safetyVerify firefighting systems, alarms, pumps, and remote controls
Life-saving appliancesInspect lifeboats, emergency equipment, and servicing records
Weathertight integrityCheck ventilators, air pipes, closures, and visible deterioration
ISM implementationReview maintenance records, open defects, and corrective actions
Pollution preventionVerify oily water separator arrangements and applicable records
Navigation safetyCheck navigation equipment, charts, and passage planning
CertificationConfirm statutory certificates, class status, and crew documentation
Crew readinessReview emergency procedures, drills, and equipment familiarization

This checklist provides an initial screening framework and does not replace statutory surveys or comprehensive PSC inspection preparation.

Reviewing Outstanding Deficiencies

After completing the checks, the Master and technical management team should identify issues requiring corrective action. Some defects may be rectified by the crew, while others require technicians, specialized service providers, or classification society attendance. Where safety-critical deficiencies cannot be resolved before arrival, the responsible company should determine whether notification to the Flag State, Recognized Organization, or relevant authority is necessary. Reporting a defect does not automatically prevent detention.

Additional PSC Considerations for 2026

The 2025 Tokyo MoU inspection results also highlighted ballast water management compliance. During the 2025 Concentrated Inspection Campaign on Ballast Water Management, deficiencies involving the proper operation of ballast water management systems were identified. For vessels equipped with these systems, owners should verify equipment condition, relevant records, approved operating procedures, and crew familiarity.

Tokyo MoU also began implementing company performance publication arrangements in 2026, increasing the visibility of shipping companies’ inspection performance. These developments reinforce the importance of consistent maintenance and corrective action across a fleet rather than preparing only for individual port inspections.

PSC Inspection Preparation with Balancia Ship Agency

PSC inspection preparation may require coordination between the vessel, shipowner, technical managers, surveyors, and local service providers. Balancia Ship Agency supports vessel operators across Indonesian ports through PSC inspection coordination, surveyor and classification society attendance arrangements, technician assistance, spare parts delivery, and related husbandry services.

When additional technical attendance or equipment delivery is required, our team assists with port access, transportation, and local logistics. Early coordination allows the necessary arrangements to be planned around the vessel’s port schedule, while technical compliance and corrective actions remain under the responsibility of the shipowner and relevant technical personnel.

Frequently Asked Questions

What are the most common PSC detainable deficiencies under the Tokyo MoU?

The 2025 report identifies fixed fire extinguishing installations, ISM implementation, lifeboats, ventilators and air pipes, and fire pumps among the most frequently recorded detainable deficiencies.

How can shipowners reduce PSC detention risks before arrival?

Shipowners can conduct a pre-arrival audit covering safety equipment, maintenance records, statutory certificates, pollution prevention systems, and crew readiness. Identified deficiencies should be evaluated and corrected wherever practicable.

 Does every PSC deficiency lead to detention?

No. Detention generally applies when deficiencies meet the relevant seriousness criteria. Other deficiencies may require corrective action without detention.

Can a ship agent arrange PSC inspection preparation in Indonesia?

A ship agent can coordinate local technical attendance, surveyor arrangements, spare parts delivery, and inspection-related logistics. Official inspections remain the responsibility of authorized PSC officers.

What happens when a vessel is detained during PSC inspection?

The vessel must address the deficiencies according to the responsible authority’s requirements. Depending on the findings, repairs, testing, or additional verification may be necessary before detention is lifted.

BALANCIA SHIP AGENCY
HQ Address : Komplex Ruko Golden City Block C No.3A, Batam City, Indonesia 29432
www.balancia.co.id
Mobile Ph. : +628112929654
Office Ph. : +62 21 31182786

References

Categories: Policy
X